Cylindrical roller bearing ring is an annular parts of radial rolling bearings with one or more raceways. 1. Forging: the toughness and strength of ferrule will be reduced if over burning, overheat and network carbide are produced during forging. Therefore, we must always strictly control the processing temperature, cycle heating and cooling conditions after forging, such as spray cooling. Especially after the final forging of a large variety of rings, the temperature should not be piled up if the temperature is above 700 degrees. 2. Heat treatment: close monitoring of heat treatment equipment is an important work in the workshop. The reliability of monitoring equipment. Important temperature control instruments such as instruments and thermocouples must be closely monitored to ensure the accuracy and reliability of the measured data; timely replacement of the error exceeding the standard is strictly prohibited. 3. Monitoring of grinding process. The finished imported bearing rings are not allowed to have grinding burn and grinding cracks, especially on the fitting surface of inner ring taper modification. If the ferrule is pickled, it should be fully inspected and the burned products should be removed. The severely burned rings should not be repaired or the unqualified ones should be scrapped. The rings with grinding burn are not allowed to enter the assembly process. Characteristic of cylindrical roller bearing ring Modelcylindrical roller bearing ring SizesCustom size requirement are also available MaterialSteel Bearing and customers requirements It is the RIGHT product for you. Applications Cylindrical roller bearing ring is the main part of cylindrical roller bearing,we supply wide rang size cylindrical roller bearing ring which can meet different customers鈥?requirements. High quality steel bearing with heat treatment, smooth surface.Bearing Parts factory website:http://www.ftm-parts.com/bearing-parts/